Pose en deux temps d’un implant court Bicon 5,0 x 6,0 mm avec une élévation sinusale interne par...
Cette vidéo montre la pose en deux temps d’un implant court Bicon 5,0 x 6,0 mm avec une élévation sinusale interne par chirurgie guidée dans la zone d’une première molaire maxillaire droite et sa restauration avec une couronne à pilier intégré (IAC™). La mise en place par chirurgie guidée a été conçue pour un implant […]
Immediate Placement of a Maxillary Lateral Incisor
This case study and technique video demonstrates the case planning, extraction, osteotomy preparation, and immediate placement of a 4.0 x 8.0mm implant with a 2.5mm well for a maxillary lateral incisor. Additionally, the technique of changing the Pilot Drill trajectory while drilling on a slope is demonstrated. This technique facilitates ideal implant placement. For the […]
Двухэтапная установка имплантата 4,0 х 8,0 мм во фронталь...
В данном клиническом видео показаны: планирование имплантационного лечения, формирование ложа и установка имплантата 4,0 х 8,0 мм (шахта 2,5 мм) в область клыка верхней челюсти с применением костного графта Synthograft и коллагеновой мембраны, раскрытие имплантата через 4 месяца после установки, снятие оттиска с уровня имплантата и протезирование интегрированной коронкой (IAC). В дополнение проведена эстетическая коррекция […]
Cấy ghép hai giai đoạn: Implant 4.0 x 8.0mm cho hàm trên và Phục hình với mão tích h...
Video sau đây trình bày việc lên kế hoạch điều trị, chuẩn bị hố xương và cắm một implant 4.0 x 8.0mm đường kính trong 2.5mm cho một răng nanh hàm trên, có sử dụng màng collagen và thủ thuật ghép xương với SynthoGraft™. Sau bốn tháng chờ lành thương, vị trí cắm implant được […]
Bicon SHORT® Implants and TRINIA® on Three
In this video, Rolf Ewers, MD, DMD, Ph.D. discusses the revolutionary TRINIA® on Three technique and its long-term results. After experiencing over six years of reliable results with full-arch TRINIA® prostheses supported by four SHORT® Implants, he decided to modify the study design in 2016 to follow full-arch TRINIA® prostheses supported by only three 4.0 […]
Two-Stage Placement of a 4.0 x 8.0mm Maxillary Canine Implant and its Restoration with an Integrated...
This case study and technique video demonstrates the case planning, osteotomy preparation, and placement of a 4.0 x 8.0mm implant with a 2.5mm well in a maxillary canine site using a collagen membrane and SynthoGraft™ bone grafting procedure. After four months of healing, its uncovering, implant-level impression, and restoration with an Integrated Abutment Crown™ (IAC) […]
Laboratory Techniques for Full-Arch TRINIA® Prostheses
The unique benefits of a full-arch TRINIA® prosthesis are evident, for both you and your patients. In order to achieve clinical success, certain techniques must be followed in the lab. This video provides an overview of those practical techniques.
Inserting a Maxillary TRINIA® Prosthesis
This case study video demonstrates the insertion of five Bicon Universal Abutments and a maxillary telescopic TRINIA® prosthesis with the resin cementation of five Retentive Copings within the passive bores of the prosthesis — all within a 30-minute office visit.