MAX 2.5® Implants

Max-2.5-Logo-LM-1a
Max 2.5 Logo DM 1a
MAX Graphic DM 1a
MAX-Image-LM-1a
THE BICON MAX 2.5® IMPLANT has an enhanced locking taper connection that has been designed exclusively for maxillary anterior single-unit restorations. Advances in manufacturing capabilities have allowed Bicon to offer this innovation with a 2.5mm diameter internal connection providing greater retention.
  • Designed exclusively for maxillary anterior single-unit restorations
  • Enhanced locking taper connection with a 2.5mm diameter that still allows for retrievability
  • Available in six implant sizes with a full range of abutments
  • MAX 2.5® Implants complement Bicon’s SHORT® and NARROW® Implants.
MAX Graphic DM 1a
MAX-Graphic-1a
4.0mm Diameter Implants
4.0mm-MAX-1b
DescriptionLengthWellPart Number
SHORT® 4.0mm Integra-CP® Implant 5.0mm2.5mm 260-340-255 
SHORT® 4.0mm Integra-CP® Implant 6.0mm2.5mm 260-340-256 
4.0mm Integra-CP® Implant 8.0mm 2.5mm 260-340-258 
4.0mm Integra-Ti® Implant 8.0mm 2.5mm 260-140-258
4.0mm Integra-CP® Implant 11.0mm 2.5mm 260-340-251 
4.5mm Diameter Implants
4.5mm-MAX-1b
DescriptionLengthWellPart Number
4.5mm Integra-CP® Implant 8.0mm 2.5mm 260-345-258 
4.5mm Integra-CP® Implant 11.0mm 2.5mm 260-345-251 

2.5mm Healing Plug Inserter

DescriptionLengthPart Number
2.5mm Healing Plug Inserter*16.0mm260-100-025

* Included with each implant with a 2.5mm Well.

2.5mm Inserter Plug and Implant 1a

Implant Selection

  • All implants are packaged with a healing plug.
  • The choice of implant length and width depends upon available bone and expected occlusal loads.
  • For an aesthetic emergence profile, the Bicon Implant is designed to be placed below the crest of the alveolar ridge to the extent that the implant is 5.0mm below the facial crest of the gingiva.
  • The implant may be placed at or slightly above the alveolar crest, if an aesthetic emergence profile is not a concern.
  • In general, choose the widest but not necessarily the longest implant the bone will allow.
  • 2.5mm well implants have been designed exclusively for maxillary anterior single-unit restorations. For any other restoration, including maxillary anterior splinted prostheses, overdentures, or fixed-removable applications, it is strongly recommended to avoid 2.5mm well Implants.
  • Posteriorly to the canine, place one implant per tooth if practical.
  • See reference for depth indicators on the 2.0mm pilot drill and the latch reamers.

MAX 2.5® Implant Literature:

MAX 2.5® Implant Product Sheet PDF