![](https://bicon.com/cms/wp-content/uploads/2023/08/SHORT_001.jpeg)
SHORT® Implants
THE BICON DESIGN is driven by simplicity. A cornerstone of its simplicity is SHORT® Implants. When the Bicon system was first introduced in 1985, its 8.0mm length implants were considered quite short — most other implants were at least 12-14mm and sometimes 18-20mm long! Since then, the natural progression of Bicon’s design philosophy has resulted in 5.0mm and 6.0mm SHORT® Implants all with proven clinical success.
Scannable Temporary Abutments
Bicon’s Scannable Temporary Abutments provide for an efficient and cost-effective digital recording of an implant’s position at the time of its one-stage surgical placement or later.
- Acts as both a temporary abutment and a Digital Scan Post at the same time
- Provides for fewer number of patient visits
- Digitally-scanned image must include the entire occlusal circumference of the abutment
- Choose any abutment size or Millable Abutment Blank for the final restoration
- Fabricate the prosthesis while the implant is healing
![](https://bicon.com/cms/wp-content/uploads/2024/01/STA-Guide-1a.jpg)
![TCTA-standard-1a TCTA-standard-1a](https://bicon.com/cms/wp-content/uploads/elementor/thumbs/TCTA-standard-1a-qjdqfkx1lmf6p74ofb06yfetiq8rbjglv08qy4e5mo.jpg)
![TC-Abutments-1a TC-Abutments-1a](https://bicon.com/cms/wp-content/uploads/elementor/thumbs/TC-Abutments-1a-qj6mysgx18pjbdzb7xxiv7f2us1uzsuar4dfuokd8g.jpg)
![TCTA-tall-1a TCTA-tall-1a](https://bicon.com/cms/wp-content/uploads/elementor/thumbs/TCTA-tall-1a-qjdqfv99ostc8wpnqxh37usw1ytso7lnkff385ytq8.jpg)
Thin Crestal Temporary Abutments
Bicon’s Thin Crestal Temporary Abutments can prevent the inadvertent over seating of an implant while facilitating mucosal closure.
- Used in either arch to prevent the inadvertent over seating of an implant
- Used with 3.0mm well implants
- Thinness facilitates mucosal closure
- Threaded bore permits for the easy insertion or removal with a threaded instrument
- Threaded bore provides for the screw retention of a membrane
Millable Abutment Blanks
Bicon’s Millable Abutment Blanks provide for custom abutments while assuring the quality and precision of the Bicon locking taper connection.
- Increase your efficiency
- Design and mill your own custom Bicon abutments with optimal gingival contours
- Assure maximum titanium contact with the gingival sulcus, especially for less than ideally positioned implants
![](https://bicon.com/cms/wp-content/uploads/2023/08/MAB_003.jpeg)
![](https://bicon.com/cms/wp-content/uploads/2024/01/TRINIA-mobile-header-1a.png)
TRINIA® Metal-Free CAD/CAM Material
WHY TRINIA®? Dentists and technicians are seeking alternatives to metal substructures with improved clinical capabilities. TRINIA® is today’s CAD/CAM solution for metal-free restorations.
ONLY TRINIA®
- Biocompatible and metal-free
- Modifiable and repairable
- Lightweight and flexible
- No firing required
- Provides for longer distal extensions
- By definition, cannot be a cantilever due to its flexibility
NEW - TRINIA® EPC Blocks
“Designed for the digital fabrication of endodontic post and core restorations less than 15mm in length.”
- Efficient and effective chairside digital fabrication of endodontic post and core restorations
- TRINIA® restorations have a similar modulus of elasticity to dentin
- The post and core restoration does not have an interface, since it is milled from one material
- If two restorations are milled together, eight post and core restorations can be milled from one block
![](https://bicon.com/cms/wp-content/uploads/2024/02/TRINIA-EPC-Milling-x-8-0124-1a.jpg)
![](https://bicon.com/cms/wp-content/uploads/2023/12/Drill-Stop-Pilot-Drill-1a.png)
Drill Stop Pilot Drills
“When the anatomy permits, Bicon’s 2.0mm diameter Drill Stop Pilot Drills allow you to confidently drill a 2.0mm pilot osteotomy confidently to a precise depth.”
- Seven stops ranging from 5.0mm–11mm
- Self-contained in compact surgical tray
- Anodized stainless steel for increased longevity